🎉 Up to 70% Off Selected ItemsShop Sale
Product image 1
HomeStore

Prochem Wood Glaze / Woodceel R801 5 Ltr

Prochem Wood Glaze / Woodceel R801 5 Ltr

  • A low odour water-based polyurethane and acrylic seal for use on wood flooring.
  • Wood Glaze can also be used on cork and will produce a tough and resilient seal with extra flexibility to withstand heavy traffic on wooden floors.

Coverage

Coverage is approx. 100 to 200m2 per 5 litres.

Directions

  • Ensure that floor is thoroughly clean and free from grease and previous finishes. Previous polyurethane or oleo-resinous seals and absorbed waxes should be removed by drum or rotary sanding method. Any old seals that remain may cause Wood Glaze not to adhere properly. If in doubt, test a small area first.
  • Apply Wood Glaze with a pad or lambswool applicator and allow to dry, this should be approximately one hour, though this will depend on conditions such as humidity and temperature.
  • At least two coats of Wood Glaze should be applied and floor should be lightly sanded after the first coat.
  • For best results apply three coats and allow finish to cure for 24 hours before subjecting floor to heavy traffic.

Ref: PC7149

Manufactured by: Prochem

$85.59
Prochem Wood Glaze / Woodceel R801 5 Ltr—
$85.59

Product Information

Shipping & Returns

Description

  • A low odour water-based polyurethane and acrylic seal for use on wood flooring.
  • Wood Glaze can also be used on cork and will produce a tough and resilient seal with extra flexibility to withstand heavy traffic on wooden floors.

Coverage

Coverage is approx. 100 to 200m2 per 5 litres.

Directions

  • Ensure that floor is thoroughly clean and free from grease and previous finishes. Previous polyurethane or oleo-resinous seals and absorbed waxes should be removed by drum or rotary sanding method. Any old seals that remain may cause Wood Glaze not to adhere properly. If in doubt, test a small area first.
  • Apply Wood Glaze with a pad or lambswool applicator and allow to dry, this should be approximately one hour, though this will depend on conditions such as humidity and temperature.
  • At least two coats of Wood Glaze should be applied and floor should be lightly sanded after the first coat.
  • For best results apply three coats and allow finish to cure for 24 hours before subjecting floor to heavy traffic.

Ref: PC7149

Manufactured by: Prochem

You may also like

NEW
Thumbnail 1

Prochem Protreat C502 5 Ltr

$22.77

-70%NEW
Thumbnail 1

Prochem Proseal R602 5 Ltr

$74.18

$22.25

NEW
Thumbnail 1

Prochem Stone Seal R603 5 Ltr

$55.87

-70%NEW
Thumbnail 1

Cleenol Floor Maintainer BN1016 5 Ltr

$13.78

$4.13

-70%NEW
Thumbnail 1Thumbnail 2

Cleenol Polish Stripper 041502 5 Ltr - for Hard Floor

$11.41

$3.42

NEW
Thumbnail 1

Prochem Proshine C503 5 Ltr

$86.17