Prochem Proshine C503 5 Ltr

Prochem Proshine C503 5 Ltr is a high-quality floor polish that gives a long-lasting and deep gloss shine to various types of floors. It is suitable for vinyl, linoleum, rubber, wood, cork, concrete, asphalt, terrazzo and other non-porous smooth floor coverings. It is a high solids metallised emulsion floor polish that is easy to apply and maintain.

Features

• High solids metallised emulsion floor polish
• Long-lasting and deep gloss shine
• Suitable for various types of floors
• Easy to apply and maintain
• Coverage approx. 250m2 per 5 litres per coat.

Instructions for using Prochem Proshine C503 5 Ltr

1. Make sure the floor is clean, dry and free from any residues. You can use a Prochem floor cleaner such as Prochem Prostrip to remove any dirt or old polish.
2. If the floor is semi-porous, concrete or impoverished, apply a base coat of Prochem Proseal to seal the surface and improve the adhesion of Prochem Proshine. Follow the directions on the label of Proseal for application and drying time.
3. Do not shake the container of Proshine. Use it as it is, without diluting with water.
4. Spread Proshine evenly on the floor using a slightly damp mop or polish applicator. Apply very thin coats, as over application can cause poor results.
5. Allow each coat to dry completely before applying the next one. This may take 30 to 60 minutes depending on the temperature and humidity.
6. Apply 2 or 3 coats of Proshine for best results. The coverage is approximately 250 m2 per 5L per coat.
7. Do not buff the floor after applying Proshine. The polish will dry to a high gloss, self-shining finish that is slip resistant and durable.
8. To maintain the shine and protection of the floor, periodically spray buff with Prochem Protreat following the directions on the label.
9. To remove Proshine from the floor, use Prochem Prostrip following the directions on the label.

pH Values

• pH Concentrate: 9.0
• pH Diluted: Not applicable